| | |
| | This specially designed swimming pool heat and cool pump is an air to water Heal Pump which extracts and magnifies low grade heat from air and delivers this upgraded combination to a swimming pool when it is operating in the heating mode. Similarly, when operating in the cooling mode, these Heat Pumps extract heat from the water in the swimming pool and deliver it to the air. Thus these Heat Pumps can be used for
heating or cooling Swimming Pool water"
"Air water pumps for outdoor installation. • Robust, lightweight casing made from corrosion-resistant magnesium coated aluminium.
• High performance evaporator battery in an inner corrugated copper tube with lacquered aluminium fins, especially for corrosive environments.
• Axial ventilator.
• Scroll compressor.
• Water condensers in G2 titanium. Guaranteed against corrosion.
• R-410A refrigerant gas.
• Expansion via thermostatic valve, with external balancing unit.
• High and low pressure switches.
• Flowmeter for controlling the water flow rate.
• Reverse cycle defrosting with 4-way valve.
• Control of purifying system.
• Electrical protection for handling and strength.
• Easy-to-use control panel with current temperature display and set point, and alarm notifications. Communication
protocols are available.
• Chiller model for possibility of cooling water in periods of high air temperature.
• Indoor model for installing the equipment in a plant room with air conductors. | |
| | Product Benefits
Achieves outstanding disinfecting results (on average 70%* available chlorine at time of manufacture)
Effective Shock product (on average 78%* available chlorine at time of manufacture)
Helps to protect plant equipment from corrosion by forming a protective layer of calcium within the pipework
Convenient pack sizes limit manual handling and storage issues
Requires no bulk storage tanks or secondary containment
30 month shelf life when stored appropriately
Cyanuric acid free | |
| | The pH value of your pool is of great importance for the water quality. A good pH value is essential for proper disinfection of the water. A good pH value ranges from 7.2 to 7.6.
If your pH is less than 7.2, you can raise it using this liquid pH plus for pool and spas. Use when the pH is too low, add 2ml pH plus per m³ water to raise the pH by 0.1 If your pool’s pH level is too low (lower than 7.2), try HTH pH Up to raise the pH levels and total alkalinity of the water. If the pool water has pH that’s too low or too high, eye and skin irritation can occur. Keep everyone comfortable with properly balanced water. With the pump running, add granules directly to the pool water spread evenly around the deep end of the pool. Use a pool brush to disperse any undissolved chemicals. Packing : 5Ltr | |
| | Swimming pool PH decrease. If the PH gets higher than 7.8, the water is becoming too alkaline.
When water is too alkaline, it reduces the effectiveness of the chlorine — the pool chemical that kills pathogens. Water with a pH that’s too high also can cause skin rashes, cloudy water and scaling on pool equipment. Over time, scaling inside pipes can build up, restricting water flow and putting a strain on your pool circulation system that can lead to costly repairs Packing : 5Ltr | |
| | AQUA PLUS Slow-dissolving Chlorine Tablets 5KG Multi-function for Pool, Hot Tubs, Fountain, and Spa Water Disinfection Treatment
Flocculants, or flocculating agents (also known as flocking agents), are chemicals that promote flocculation by causing colloids and other suspended particles in liquids to aggregate, forming a floc. Flocculants are used in swimming pool water treatment processes to improve the sedimentation or filterability of small particles. Packing : 5Ltr | |
| | AQUA PLUS Liquid Algaecide for Pool, Spa, jacuzzi baths, and Fountain. Algicide for Anti-Algae Water Treatment Chemical 5L
Algicide for Anti-Algae Water Treatment.
An algaecide may be used for controlled bodies of water (reseviors, golf ponds, swimming pools), but may also be used on land for locations such as turfgrass.
Effectively controls green water algae, string and hair algae, blanketweed algae.
Controls green water to keep pool water clean and clear.
Its the most effective, environmentally friendly product. Algaecide or algicide is a biocide used for killing and preventing the growth of algae, often defined in a loose sense that, beyond the biological definition, also includes cyanobacteria ("blue-green algae"). Packing : 5Ltr | |
| | AQUA PLUS Chlorine Granules for Water Treatment in Swimming Pool, Spas, Hot Tubs and Fountains, 5 KG
Swimming pools and spas will always be at risk of contamination by algae, bacteria and other contaminants and microorganisms. This is why it is necessary to use high quality sanitizing chemicals such as In Aquaplus Chlorinating Granules on a regular basis to keep your pool water clean and safe for your swimmers
"In Aquaplus granular chlorine will swiftly and effectively eradicate bacteria and other organic contaminants from your swimming pool or spa without leaving any residue so you can enjoy clean, sanitized water and peace of mind. Fast acting granular chlorine is available in bags and buckets, and the calcium-free formula is favored by pool owners in hard-water areas Packing : 5Kg" | |
| | Slow-dissolving Chlorine Tablets 5KG & 25KG Multi-function for Pool, Hot Tubs, Fountain, and Spa Water Disinfection Treatment
TriChloroisoCyanurate / Trichloroisocyanuric Acid TCCA *MUST be used with the Floating Chlorine Dispenser , DO NOT place tablets into the pool directly. The chlorine level of a pool should be maintained between 1.0 and 3.0 ppm Thicker than other pool chlorine tablets, allowing for a slow dissolve while still the ideal size for your floaters or automatic feeders.
• Our most popular chlorine!
• Slow-dissolving.
• Powerful 90% available stabilized chlorine.
• Perfect size for floaters or any automatic chlorine feeder.
• 99% Trichloro-S-Triazinetrione.
• Tablets are individually wrapped, in easy-open bucket | |
| | Slow-dissolving Chlorine Tablets 5KG & 25KG Multi-function for Pool, Hot Tubs, Fountain, and Spa Water Disinfection Treatment
TriChloroisoCyanurate / Trichloroisocyanuric Acid TCCA *MUST be used with the Floating Chlorine Dispenser , DO NOT place tablets into the pool directly. The chlorine level of a pool should be maintained between 1.0 and 3.0 ppm Thicker than other pool chlorine tablets, allowing for a slow dissolve while still the ideal size for your floaters or automatic feeders.
• Our most popular chlorine!
• Slow-dissolving.
• Powerful 90% available stabilized chlorine.
• Perfect size for floaters or any automatic chlorine feeder.
• 99% Trichloro-S-Triazinetrione.
• Tablets are individually wrapped, in easy-open bucket | |
| | Sodium metabisulfite (chlorine neutralizer) is just a chemical used to reduce or remove chlorine in a swimming pool.
While chlorine is benificial to a pool, it can also be harmful if there is too much of it in the pool. After shocking of the swimming pool and test the water, may discover that the chlorine level is too high and not good for swimming, chlorine neutralizer brings that level down quickly so that can be swim safely. | |
