| | |
| | One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2. CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical and weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with next-generation 1 1/2″, 6+1 multiport valve from AstralPool with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Top diffuser to ensure good water distribution above the filtering bed. – Inner 1 1/2″ connectors for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water in the filter body, for easy drainage of the filter without losing sand.
– Built-in collector at the bottom ensures balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
ADVANTAGES:
– Excellent performance and reliability: Millennium filters are designed to meet the needs of the most demanding customer and can filter from 5.500 l/h to 12,000 l/h at a filtering rate of 50 m3/h/m2. They are also fitted with an AstralPool multiport valve with 6+1 positions for filter, backwash, rinse, recirculate, waste, and close. In fact, this reliable valve is used on most AstralPool filters. | |
| | One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2. CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical and weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with next-generation 1 1/2″, 6+1 multiport valve from AstralPool with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Top diffuser to ensure good water distribution above the filtering bed. – Inner 1 1/2″ connectors for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water in the filter body, for easy drainage of the filter without losing sand.
– Built-in collector at the bottom ensures balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
ADVANTAGES:
– Excellent performance and reliability: Millennium filters are designed to meet the needs of the most demanding customer and can filter from 5.500 l/h to 12,000 l/h at a filtering rate of 50 m3/h/m2. They are also fitted with an AstralPool multiport valve with 6+1 positions for filter, backwash, rinse, recirculate, waste, and close. In fact, this reliable valve is used on most AstralPool filters. | |
| | One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2. CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical and weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with next-generation 1 1/2″, 6+1 multiport valve from AstralPool with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Top diffuser to ensure good water distribution above the filtering bed. – Inner 1 1/2″ connectors for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water in the filter body, for easy drainage of the filter without losing sand.
– Built-in collector at the bottom ensures balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
ADVANTAGES:
– Excellent performance and reliability: Millennium filters are designed to meet the needs of the most demanding customer and can filter from 5.500 l/h to 12,000 l/h at a filtering rate of 50 m3/h/m2. They are also fitted with an AstralPool multiport valve with 6+1 positions for filter, backwash, rinse, recirculate, waste, and close. In fact, this reliable valve is used on most AstralPool filters. | |
| | One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2. CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical and weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with next-generation 1 1/2″, 6+1 multiport valve from AstralPool with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Top diffuser to ensure good water distribution above the filtering bed. – Inner 1 1/2″ connectors for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water in the filter body, for easy drainage of the filter without losing sand.
– Built-in collector at the bottom ensures balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
ADVANTAGES:
– Excellent performance and reliability: Millennium filters are designed to meet the needs of the most demanding customer and can filter from 5.500 l/h to 12,000 l/h at a filtering rate of 50 m3/h/m2. They are also fitted with an AstralPool multiport valve with 6+1 positions for filter, backwash, rinse, recirculate, waste, and close. In fact, this reliable valve is used on most AstralPool filters. | |
| | One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2. CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical and weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with next-generation 1 1/2″, 6+1 multiport valve from AstralPool with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Top diffuser to ensure good water distribution above the filtering bed. – Inner 1 1/2″ connectors for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water in the filter body, for easy drainage of the filter without losing sand.
– Built-in collector at the bottom ensures balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
ADVANTAGES:
– Excellent performance and reliability: Millennium filters are designed to meet the needs of the most demanding customer and can filter from 5.500 l/h to 12,000 l/h at a filtering rate of 50 m3/h/m2. They are also fitted with an AstralPool multiport valve with 6+1 positions for filter, backwash, rinse, recirculate, waste, and close. In fact, this reliable valve is used on most AstralPool filters. | |
| | One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2. CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical and weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with next-generation 1 1/2″, 6+1 multiport valve from AstralPool with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Top diffuser to ensure good water distribution above the filtering bed. – Inner 1 1/2″ connectors for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water in the filter body, for easy drainage of the filter without losing sand.
– Built-in collector at the bottom ensures balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
ADVANTAGES:
– Excellent performance and reliability: Millennium filters are designed to meet the needs of the most demanding customer and can filter from 5.500 l/h to 12,000 l/h at a filtering rate of 50 m3/h/m2. They are also fitted with an AstralPool multiport valve with 6+1 positions for filter, backwash, rinse, recirculate, waste, and close. In fact, this reliable valve is used on most AstralPool filters. | |
| | Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. Maximum filtration velocity 50 m3/h/m2. CHARACTERISTICS:
– Bobbin-wound sand filters in polyester/fibreglass resin.
– Cover of Ø 240 mm with screw closure, die-injected for diameters up to 900 mm. Cover of Ø 400 mm with screw closure, die-injected for Ø 1050 and Ø 1200 mm.
– Blue satin-finish, with dust protection with a clear polyurethane flash coat for Ø 500, Ø 600, Ø 750 and Ø 900. Blue finish for Ø 1050 and Ø 1200.
– Equipped with collectors and diffuser of highly resistant PVC and PP plastic.
– Fitted with pressure gauge and manual air and water bleeder valves. For models of Ø 900, Ø 1050 and Ø 1200, includes sand drain of 2 1/2″ sand purge.
– Side-mount, 6+1 way selector valve for filter, backwash, rinse, recirculate, waste and closed, except for models of Ø 500, Ø 600 and Ø 750.
– Maximum flow rate: 50 m3/h/m2. – Maximum operating pressure: 2,5 kg/cm2.
– Inner coating of HDPE (polyethylene), blown for Ø 500 and Ø 600mm, thermoformed ABS for Ø 750 and Ø 900 mm, and polyester/fibreglass for Ø 1050 and Ø 1200 mm.
– Filter base manufactured in plastic with diameter up to 750 mm and polyester and fibreglass for larger diameters. Note: Operating pressure of 4 kg/cm2 available by special order.
ADVANTAGES:
– Easy access: Owing to the larger diameter of the top manhole (400 mm) for filters of diameter 1050 mm and 1200 mm, the filter interior can be more easily accessed for servicing.
– Improved finish: Apart from its bobbinwound finish, which provides greater resistance and safety, the blue satin-finish distinguishes it from conventional filters. | |
| | Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. Maximum filtration velocity 50 m3/h/m2. CHARACTERISTICS:
– Bobbin-wound sand filters in polyester/fibreglass resin.
– Cover of Ø 240 mm with screw closure, die-injected for diameters up to 900 mm. Cover of Ø 400 mm with screw closure, die-injected for Ø 1050 and Ø 1200 mm.
– Blue satin-finish, with dust protection with a clear polyurethane flash coat for Ø 500, Ø 600, Ø 750 and Ø 900. Blue finish for Ø 1050 and Ø 1200.
– Equipped with collectors and diffuser of highly resistant PVC and PP plastic.
– Fitted with pressure gauge and manual air and water bleeder valves. For models of Ø 900, Ø 1050 and Ø 1200, includes sand drain of 2 1/2″ sand purge.
– Side-mount, 6+1 way selector valve for filter, backwash, rinse, recirculate, waste and closed, except for models of Ø 500, Ø 600 and Ø 750.
– Maximum flow rate: 50 m3/h/m2. – Maximum operating pressure: 2,5 kg/cm2.
– Inner coating of HDPE (polyethylene), blown for Ø 500 and Ø 600mm, thermoformed ABS for Ø 750 and Ø 900 mm, and polyester/fibreglass for Ø 1050 and Ø 1200 mm.
– Filter base manufactured in plastic with diameter up to 750 mm and polyester and fibreglass for larger diameters. Note: Operating pressure of 4 kg/cm2 available by special order.
ADVANTAGES:
– Easy access: Owing to the larger diameter of the top manhole (400 mm) for filters of diameter 1050 mm and 1200 mm, the filter interior can be more easily accessed for servicing.
– Improved finish: Apart from its bobbinwound finish, which provides greater resistance and safety, the blue satin-finish distinguishes it from conventional filters. | |
| | Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. Maximum filtration velocity 50 m3/h/m2. CHARACTERISTICS:
– Bobbin-wound sand filters in polyester/fibreglass resin.
– Cover of Ø 240 mm with screw closure, die-injected for diameters up to 900 mm. Cover of Ø 400 mm with screw closure, die-injected for Ø 1050 and Ø 1200 mm.
– Blue satin-finish, with dust protection with a clear polyurethane flash coat for Ø 500, Ø 600, Ø 750 and Ø 900. Blue finish for Ø 1050 and Ø 1200.
– Equipped with collectors and diffuser of highly resistant PVC and PP plastic.
– Fitted with pressure gauge and manual air and water bleeder valves. For models of Ø 900, Ø 1050 and Ø 1200, includes sand drain of 2 1/2″ sand purge.
– Side-mount, 6+1 way selector valve for filter, backwash, rinse, recirculate, waste and closed, except for models of Ø 500, Ø 600 and Ø 750.
– Maximum flow rate: 50 m3/h/m2. – Maximum operating pressure: 2,5 kg/cm2.
– Inner coating of HDPE (polyethylene), blown for Ø 500 and Ø 600mm, thermoformed ABS for Ø 750 and Ø 900 mm, and polyester/fibreglass for Ø 1050 and Ø 1200 mm.
– Filter base manufactured in plastic with diameter up to 750 mm and polyester and fibreglass for larger diameters. Note: Operating pressure of 4 kg/cm2 available by special order.
ADVANTAGES:
– Easy access: Owing to the larger diameter of the top manhole (400 mm) for filters of diameter 1050 mm and 1200 mm, the filter interior can be more easily accessed for servicing.
– Improved finish: Apart from its bobbinwound finish, which provides greater resistance and safety, the blue satin-finish distinguishes it from conventional filters. | |
| | Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. Maximum filtration velocity 50 m3/h/m2. CHARACTERISTICS:
– Bobbin-wound sand filters in polyester/fibreglass resin.
– Cover of Ø 240 mm with screw closure, die-injected for diameters up to 900 mm. Cover of Ø 400 mm with screw closure, die-injected for Ø 1050 and Ø 1200 mm.
– Blue satin-finish, with dust protection with a clear polyurethane flash coat for Ø 500, Ø 600, Ø 750 and Ø 900. Blue finish for Ø 1050 and Ø 1200.
– Equipped with collectors and diffuser of highly resistant PVC and PP plastic.
– Fitted with pressure gauge and manual air and water bleeder valves. For models of Ø 900, Ø 1050 and Ø 1200, includes sand drain of 2 1/2″ sand purge.
– Side-mount, 6+1 way selector valve for filter, backwash, rinse, recirculate, waste and closed, except for models of Ø 500, Ø 600 and Ø 750.
– Maximum flow rate: 50 m3/h/m2. – Maximum operating pressure: 2,5 kg/cm2.
– Inner coating of HDPE (polyethylene), blown for Ø 500 and Ø 600mm, thermoformed ABS for Ø 750 and Ø 900 mm, and polyester/fibreglass for Ø 1050 and Ø 1200 mm.
– Filter base manufactured in plastic with diameter up to 750 mm and polyester and fibreglass for larger diameters. Note: Operating pressure of 4 kg/cm2 available by special order.
ADVANTAGES:
– Easy access: Owing to the larger diameter of the top manhole (400 mm) for filters of diameter 1050 mm and 1200 mm, the filter interior can be more easily accessed for servicing.
– Improved finish: Apart from its bobbinwound finish, which provides greater resistance and safety, the blue satin-finish distinguishes it from conventional filters. | |
