List Layout

2.4G controller is newly introduced wireless high-power LED controller. It equips with touch remote control, touch remote control adopts high precision capacitance touch control technology, you can select the color you need by one button. It is convenient and easy. Each controller has a globally unique address code, in order to prevent confusion caused by controlling repeated address code. Each controller can be equipped with four remote controls, can achieve multiple controllers synchronization control. It is used for controlling a variety of lamp whose source of light is LED.

Versatile use
The MD 200 photometer can be used in almost all areas of water analysis.

Application
Boiler Water | Cooling Water | Disinfection Control | Drinking Water Treatment | Pool Water Control | Pool Water Treatment | Raw Water Treatment | Waste Water Treatment

Precise and low maintenance
The high-precision optics, which in addition to long-term stable LEDs as light sources, also offer high-quality interference filters, ensure precise and reproducible measurement results. In addition, these components make the photometer low-maintenance.

User friendly
The devices impress with their ease of use, ergonomic design and compact dimensions, which makes handling the devices easy and safe.

2-Way Pool Water Quality Testing Kit, Standard Dual Test Kit Chlorine & PH with Carry Case for Swimming Pool, Drinking Water and Spa.

It is compact, easy to carry and has a delicate appearance.
It can be used in swimming pools, hot springs, spas, any water you want to test.
Its measurement is accurate and you can use it safely.It will be your preferred water quality test.

6-way Test Kit:
PH, CL, Bromine, Alkalinity, Acid Demand, Total Hardness

Chlorine test (cl)
1. Rinse the vial and fill to the mark with water sample taken 40cm below the surface and away from water lines.
2. Add 4 drops of OTO(Ortholidine) solution.
3. Place the cap on vial and invert several times to mix
4. Compare your reading with the Cl colour

Proportion of Hydrogen Test (PH)
This test indicates the pH condition of the pool water.
For comfortable water, the ideal reading is 7.2 to 7.6

Proportion of Hydrogen Test (PH)
1. Rinse the test vial and fill to the mark with water sample taken 40cm below the surface and away from water lines.
2. Add 4 drops of Phenol red solution
3. Place cap on vial and invert several times to mix,
4. Compare your reading with the pH colour standards.

Note: If your chlorine reading is above 3.0 you may obtain a flase result when testing for pH. in this case, lower Cl first before performing any other tests.