List Layout

Main drains, to recirculate the water at the bottom of the pool
Located in the deepest part of the pool, the drains collect water from the bottom so it can be filtered or fully drained from the pool.

Support ring in white ABS, grille in S.S. 18/8/2 AISI-316L. Complete with grille fixing screws. Recommended max. flow: 13 m3/h.

New range of Drain grilles for use in residencial and comercial swimming pool applications. Available in plastic or stainless steel. Frames made in plastic. Grilles designed according to standard EN-13451-1:200. Excellent finish.

Made of white ABS, the inlets adapt to any kind of pool. The return inlets return filtered, treated water to the pool. They include the multi-flow system, which allows the diameter, and therefore the flow rate of the water through the inlets, to be selected.
The suction inlets are used to connect the pool cleaner.
The bottom inlets are placed in the floor of the pool so that they return water at floor level. They prevent dirt from settling by carrying it towards the surface.
MULTIFLOW SYSTEM

The eyeball has been marked with a series of “knock-outs” at 14, 20, and 25 mm, enabling the required flow to be selected at the time of installation.

Recommended max flow 4 m/sec., complies with EN 13451-1:

Ø 14 mm = >2.2 m3/h, Ø 20 mm = 4,5 m3/h, Ø 25 mm = 7 m3/h 2″ external thread, Ø 50 mm. Made in white ABS. Can be installed with wall conduits: 15658-15659. Grille slots are < 8 mm. Complies with EN 13451-1.

Made of white ABS, the inlets adapt to any kind of pool. The return inlets return filtered, treated water to the pool. They include the multi-flow system, which allows the diameter, and therefore the flow rate of the water through the inlets, to be selected.
The suction inlets are used to connect the pool cleaner.
The bottom inlets are placed in the floor of the pool so that they return water at floor level. They prevent dirt from settling by carrying it towards the surface.
Multiflow return inlet to be glued to a Ø50 mm PN10 pipe in concrete pools and with a water outlet through a Ø20 mm hole.

Made of white ABS, the inlets adapt to any kind of pool. The return inlets return filtered, treated water to the pool. They include the multi-flow system, which allows the diameter, and therefore the flow rate of the water through the inlets, to be selected.
The suction inlets are used to connect the pool cleaner.
The bottom inlets are placed in the floor of the pool so that they return water at floor level. They prevent dirt from settling by carrying it towards the surface.
Made in white ABS / SS. Adjustable flow by rotating the grille. Suction surface area: 0.015 m2. Outer Ø 295 mm. Flow rate (0.4 m/s.) 20 m3/h. Max. recommended flow rate flow according to EN-13451-1: 26 m3/h (0.5 m/s.)