 | External thread 1 1/2″. Made in S.S. AISI-316L. Recommended max. flow. 4,50 m3/h. Complies with EN 16582-1 and EN 16713-2 : 4500 l/h. Ball Ø 20 mm. Round / square shape embellisher. Made entirely of 18/8/2 (AISI-316) stainless steel, its purpose is to suck water from the deepest part of the pool shell so that it can be completely recycled. It also plays an important role when the pool is being emptied. All models have a grill that complies with health and safety standards whereby the holes must be less than 8 mm apart to prevent bathers from trapping their fingers in them. | |
 | o be glued to Ø 63 mm and Ø 50 mm piping. Maximum pressure: 6 bar. Made of white ABS. 11/2” thread. | |
 | Outer 2″ thread, Ø 50 mm inner wall. Maximum pressure: 6 bar. Made of white ABS with 11/2″ threaded plug. Recommended for installation with wall conduits (codes 15658 and 15659). | |
 | Body and grille in ABS. Screws in S.S. To be glued to external Ø 63 mm. Owing to its design this inlet is particulary suitable for overflow channels. | |
 | To glue inside Ø 50 mm 10 bar pipe. Made in white ABS . Plug thread 1 1/2''. Recommended to be installed with wall conduits 15658 & 15659. End connection 07958 and push fit connection 01393 | |
 | 150 mm conduits for Ø 2″ inlets and “Multiflow”, that can be easily be cut to required lengths depending on pool shell thickness. They all have 2 holes for positioning within the pool shell. PVC grey colour | |
 | Life Jackets can be used as a safety device for swimming, boating, surfing, water skiing, and other activities. With an adjustable strap and zipper providing the perfect fit, the Life Jacket is a piece of standard safety equipment for reducing the risks | |
 | 2.5 kg Lifebuoy Ring With Reflective Tape & Grab Lines. Orange colour lifebelt made of plastic | |
 | EVA lightweight foam | |
 | Polyurethane foam |
List Layout
Filters Sort results
Reset Apply