| | |
| | | Code | Product Description | | SWPB100 | Astralite Pump High Performance Model 1HP 230 V II | | SWPB150 | Astralite Pump High Performance Model 1.5HP 230 V II | | SWPB200 | Astralite Pump High Performance Model 2HP 230 V II | | SWPB300 | Astralite Pump High Performance Model 3HP 230 V II |
Country: Spain | |
| | | |
| | | |
| | Swimming pool, whirlpool, water fountain and spa:
Centrifugal single stage pump for water recirculation and filtration
Applications:
Water recirculation and filtration for large swimming pools.
Silent.
Self-priming up to 4m.
Materials:
Pump body, impeller, diffuser, suction and discharge in technopolymer.
Pump shaft in AISI 431.
Mechanical seal in aluminium-graphite.
Motor casing in aluminium.
O-rings in NBR/EPDM.
Equipment:
No cable.
Unions included 63mm.
Motor:
Asynchronous 2 poles.
IPX5protection.
Class F insulation.
Single phase motor with built-in thermal protection.
Continuous operation. | |
| | Optimised and super-silent hydraulic system
Visibility of the internal prefi lter, easy access
Impeller in corrosion-resistant and hard-wearing Noryl®
Double drain, easy opening (no tools required)
Connections: includes slip unions for Ø 50 or Ø 63 mm. ANSI 1½-2”
Suitable for use in salt water
Usage: for residential pools up to 177 m3 | |
| | The sought after Euroswim is a low noise, self-priming centrifugal pump with a large pre-filter basked enabling the user to empty less often and minimise maintenance. Features
- High efficiency pump for swimming pools
- High capacity pre-filter: Up to 1.5HP 4 litres and 3HP from 5 litres
- 2- suction and discharge ports reinforced with stainless steel rings
- Liquid temperature: Up to 60 deg C
- Ambient temperature: Up to 50 deg C
- Reduced noise levels of 53-64 LpA
- Strainer cover in clear polycarbonate to guarantee constant visibility through time
- Suitable for salt chlorinated pools | |
| | Ivory colour. Injected thermo-plastic shell with built in base. Supplied with pressure gauge, manual air vent, and multiport valve. Maximum filtration velocity: 50 m3/h/m2.Maximum working pressure: 2,5 kg/cm2. CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical-resistant, weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with 11/2″, 6+1 multiport valve from AstralPool for the 400-mm, 500-mm, and 600-mm diameters or 2″, 6+1 multiport valve for 750-mm diameters, and 2 1/2″, 6+1 multiport valve for 900-mm diameters, with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Collector and diffuser for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water of 3/4″ in the sand drain plug of the filter for easier drainage without losing sand.
– Sand drain: 1 1/2″ for 400-mm, 500-mm, and 600-mm diameters and 2″ for 750-mm diameter.
– Built-in collector at the bottom to ensure balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
– Built-in base in the lower half of the filter, with holes for correct anchoring to the floor.
– Extra-large 225-mm manhole for easier handling and loading of sand in 900-mm diameters. The upper manhole is 177 mm in the rest of the range. | |
| | One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2. CHARACTERISTICS:
– Available with side mount or top mount, to adapt to the particular characteristics and available space at each pool site.
– Filter body manufactured of chemical and weatherresistant, inalterable plastic. Designed for outdoor use.
– Standard equipment with next-generation 1 1/2″, 6+1 multiport valve from AstralPool with bayonet closure for filter, backwash, rinse, recirculate, waste, close, and winter operations (all inlets and outlets are connected).
– Transparent lid for easier visual inspection and access to the inside of the filter in side-mount valves.
– Top diffuser to ensure good water distribution above the filtering bed. – Inner 1 1/2″ connectors for continuous operation.
– Manual bleeder valve for purging air inside the filter, if necessary.
– Built-in manual bleeder valve for water in the filter body, for easy drainage of the filter without losing sand.
– Built-in collector at the bottom ensures balanced flow and filter backwash.
– Pressure gauge to control filter backwash.
ADVANTAGES:
– Excellent performance and reliability: Millennium filters are designed to meet the needs of the most demanding customer and can filter from 5.500 l/h to 12,000 l/h at a filtering rate of 50 m3/h/m2. They are also fitted with an AstralPool multiport valve with 6+1 positions for filter, backwash, rinse, recirculate, waste, and close. In fact, this reliable valve is used on most AstralPool filters. | |
| | Ø 400 mm injected lid. Complete with pressure gauge, water purges, and multiport valve. Maximum filtration velocity 50 m3/h/m2. CHARACTERISTICS:
– Bobbin-wound sand filters in polyester/fibreglass resin.
– Cover of Ø 240 mm with screw closure, die-injected for diameters up to 900 mm. Cover of Ø 400 mm with screw closure, die-injected for Ø 1050 and Ø 1200 mm.
– Blue satin-finish, with dust protection with a clear polyurethane flash coat for Ø 500, Ø 600, Ø 750 and Ø 900. Blue finish for Ø 1050 and Ø 1200.
– Equipped with collectors and diffuser of highly resistant PVC and PP plastic.
– Fitted with pressure gauge and manual air and water bleeder valves. For models of Ø 900, Ø 1050 and Ø 1200, includes sand drain of 2 1/2″ sand purge.
– Side-mount, 6+1 way selector valve for filter, backwash, rinse, recirculate, waste and closed, except for models of Ø 500, Ø 600 and Ø 750.
– Maximum flow rate: 50 m3/h/m2. – Maximum operating pressure: 2,5 kg/cm2.
– Inner coating of HDPE (polyethylene), blown for Ø 500 and Ø 600mm, thermoformed ABS for Ø 750 and Ø 900 mm, and polyester/fibreglass for Ø 1050 and Ø 1200 mm.
– Filter base manufactured in plastic with diameter up to 750 mm and polyester and fibreglass for larger diameters. Note: Operating pressure of 4 kg/cm2 available by special order.
ADVANTAGES:
– Easy access: Owing to the larger diameter of the top manhole (400 mm) for filters of diameter 1050 mm and 1200 mm, the filter interior can be more easily accessed for servicing.
– Improved finish: Apart from its bobbinwound finish, which provides greater resistance and safety, the blue satin-finish distinguishes it from conventional filters. | |
| | One of the basic tasks required by a pool is the good maintenance of the water by filtration. A regular task that you will need to carry out is to monitor the various functions performed by your filter. This should be as straightforward as possible, above all to ensure that of the water in your pool is in a perfect condition at all times.
AstralPool’s range of multi-port valves is designed with the user in mind who has to handle them. With an innovative design, easy to handle and of unbeatable reliability, these multi-port valves are a basic component for achieving pool water in a perfect condition.
Manual multi-port values are most commonly used. They are called manual because the lever at the top has to be turned to select any of the processes performed by them. The valves are either connected to top or the side of the filter, depending on the model chosen. | |
